Loader

Machine Information

VC0852 | Vertical Machining Center

VC Series vertical machining centers are fast, three-axis linear guide machining centers designed for customers doing batch or production work

  • Request More Info
  • Email to a Friend
  • PDF Brochure
  • Print
VC0852

Enter the information required to receive pricing and quotation for this model. The quote and price (MSRP) will be sent to your email address.
To contact TAKUMI, call 1-844-302-3792 or email info@takumiusa.com

DESCRIPTION
  • Machine Type Linear Guide Machining Center
  • Control Info Takumi FANUC© H Control
  • Series VC Series
  • Model VC0852
  • Travels 33.9 x 20.47 x 24 in (1,060 x 520 x 610 mm)
  • Table Size 39.4 x 20.47 in / 1,000 x 520 mm
  • Table Max. Load 1,102 lbs / 500 kg
  • Spindle Speed 12,000 rpm
  • Motor Power 10.1/14.8 HP (7.5/11 kW)
  • Spindle Taper CAT/BT 40
  • Magazine Capacity 24 tools
  • Rapids 1,417 x 1,417 x 944 in/min (36 x 36 x 24 m/min)
  • Machine Net Weight 12,566 lbs / 5,699 kg

SPINDLE

14.8
12000
  •  Machine Overview
  •  Technical Specifications
  •  Spindle Information

VC SERIES

VC Series vertical machining centers are fast, three-axis linear guide machining centers designed for customers doing batch or production work

Fast Rapids + High Precision

• Rapids of 1,417 inches per minute
• Perfect combination of fast cutting and high stability
• Designed and built for mold machining
• Pre-tensioned ballscrews minimize thermal growth and improve accuracy
• Ergonomic table simplifies setup
• Swiveling control panel optimizes floor space utilization
• Robust, precision-machined castings
• Hand-scraped contact areas
• 24-tool, CAT 40, swing-arm ATC standard
• Integrated washdown and chip management system
• Spindle chiller maximizes heat dissipation
• Direct-coupled ballscrews increase accuracy
• Absolute encoder ensures fast start-up
• FANUC© 0i-MF Series Control
• Fast, trained, factory service and support

SPECIFICATIONS VC0852
TRAVEL X-Axis 33.86 in / 806 mm
Y-Axis 20.47 in / 520 mm
Z-Axis 24.02 in / 610 mm
Distance from Spindle Nose to Table 4.53 ~ 28.54 in / 115 ~ 725 mm
Distance from Spindle Nose to Z-Axis Guide Ways 22.64 in / 575 mm
TABLE Dimensions 39.4 x 20.47 in / 1,000 x 520 mm
Max. Load 1,102 lbs / 500 kg
T-slot (number x width x pitch) 5 x .71” on 3.94” Centers/

5 x 18mm on 100mm Centers

SPINDLE Type Belt
Spindle Speed 12,000 rpm
Motor Power (cont./30 min) 10.1/14.8 HP / 7.5/11 kW
Spindle Taper CAT 40/BT 40
FEED RATE Rapid Traverse (X/Y/Z) 1,417 x 1,417 x 944 ipm /
36 x 36 x 24 m/min
Cutting Feed Rate 0.04 ~ 472.44 ipm /
1 ~ 12,000 mm/min
Power (X/Y/Z) 2.4/4.0/3.3 hp / 1.8/3.0/2.5 kW
ATC & MAGAZINE ATC Type Swing-Arm
Magazine Capacity 24 tools
Maximum Tool Diameter
(next pocket empty)
3.15/5.91 in / 80/150 mm
Maximum Tool Length 11.8 in / 300 mm
Maximum Tool Weight 15.4 lbs / 7 kg
Tool Shank CAT40 (BT 40 optional)
SPACE & SYSTEM
REQUIREMENTS
Pneumatic Pressure 5 CFM @ 85-115 psi /
0.14m3 /min. @ 6-8 bar
Electrical Power Consumption 30 KVA
Machine Net Weight 12,566 lbs / 5,699 kg
Machine Dimension 104.68 x 84.72 x 112.01 in /
2,659 x 2,152 x 3,099 mm
Operating Dimensions (W x L x H) 195.15 x 147.36 x 122.01 in /
4,957 x 3,743 x 3,099 mm

Information may change without notice. Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions.

High Accuracy + High Performance Spindle | BIG-PLUS® Spindles

Belt-type and gear-type spindles, based on machining requirements

  • 12,000 RPM Belt-type spindles

Spindle Power & Torque Charts

Spindle Torque Charts VC0852 Takumi USA

Belt Spindle

Belt Type Spindle VC Series Takumi USA

Related Machines

Top