UVC600

5-Axis High Performance DDM Cantilever Table

The cantilever table uses integral direct drive motors (DDM),instead of gear drives, promoting quicker response, higher torque, outstanding position accuracy and lower service maintenance. The cantilever table is driven by direct drive motor (DDM), which motion can be delivered 100% from motor to provide high speed, high torque and zero backlash. Easy loading and unloading of heavy and large workpieces through the gap on the top cover by over-head crane. The sliding maintenance door design makes people to have easier access to the hydraulic system and the spindle clamping system.

Technical Specifications

Weight	30864.72 lbs
Dimensions	151.77 × 128.15 × 138.58 in
Control
Control Type	Heidenhein® TNC 640
Travel
X-Axis	820 mm
Y-Axis	550 mm
Z-Axis	500 mm
Distance from Spindle Nose to Table	150-650 mm
Table
Table Size	23.62 in (600 mm) diameter
Table Max. Load	350 kg
T-Slot Size	.55 x 3.94 x .20 in (14 x 100 x 5 mm)
Spindle
Spindle Speed	15000 rpm
Spindle Power	18.8 HP (14 KW)
Spindle Taper	Big Plus® CAT 40
Rotation range \| accuracy	360° \| +/-5
Feed Rate
Rapid Traverse (X/Y/Z)	1417 x 1417 x 1417 ipm (36 x 36 x 36 m/min)
Cutting Feed Rate	787 ipm (20 m/min)
ATC
ATC Type	Chain Type
Magazine Capacity	40
Max. Tool Diameter	Next pocket empty 2.95 / 5.91 in (75 / 150 mm)
Max. Tool Length	11.81 in (300 mm)
Max. Tool Weight	7 kg
Tool Shank	CAT 40 (BT 40 Optional)
Space & System Requirements
Machine Net Weight	1000 kg
Electrical Power Consumption	60 KVA
Pneumatic Pressure	85.34 psi (6 kgf/cm²)

Information may change without notice. Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions.