V11

3-Axis Box-Way Machining Center

V SERIES

Built for heavy material removal, production, and excellent surface finish.

Belt or geared spindles to provide maximum torque.
Large box ways for rigid and heavy cutting.
Pre-tensioned ballscrews minimize thermal growth and improve accuracy.
Direct-coupled motors increase accuracy and speed.
Spindle chiller maximizes heat dissipation.
Extra-wide door openings facilitate easy loading and unloading.
Hand-scraped contact areas.
Robust, precision-machined castings.
Box-shape bed made of one-piece casting.
Integrated washdown and chip management system.
Absolute encoders ensure fast start-up.
Fanuc© 0i-MF Plus Control.

Technical Specifications

Control
Control Type	Fanuc© 0i-MF Plus
Travel
X-Axis	43.3 in (1100 mm)
Y-Axis	26 in (660 mm)
Z-Axis	24 in (610 mm)
Distance from Spindle Nose to Table	5.91 ~ 29.92 in (150 ~ 760 mm)
Table
Table Size	45.2 x 25.6 in (1150 x 650 mm)
Table Max. Load	2425.01 lbs (1100 kg)
T-Slot Size	5 x .71” on 3.94” Centers (5 x 18 mm on 100 mm Centers)
Spindle
Spindle Speed	8000 rpm
Spindle Power	20 HP (15 KW)
Spindle Taper	CAT 50
Peak Spindle Torque	397 ft lb (539 Nm)
Through-Spindle Coolant	30 bar / 435 psi
Feed Rate
Rapid Traverse (X/Y/Z)	945 x 945 x 787 ipm (24 x 24 x 20 m/min)
Cutting Feed Rate	315 ipm (8 m/min)
ATC
ATC Type	Swing Arm
Magazine Capacity	24 Tools
Max. Tool Diameter	Next pocket empty 4.1 / 7.9 in (105 / 200 mm)
Max. Tool Length	9.8 in (250 mm)
Max. Tool Weight	33 lbs (15 kg)
Tool Shank	CAT 50
Space & System Requirements
Machine Net Weight	14960 lbs (6800 kg)
Electrical Power Consumption	35 KVA
Pneumatic Pressure	5 CFM @ 85-115 psi (0.14m3 /min) @ 6-8 bar
Operating Dimensions	248.03 x 165.35 x 124.02 in (6300 x 4200 x 3150 mm)

Information may change without notice. Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions.