V15

3-Axis Box-Way Machining Center

V SERIES

Built for heavy material removal, production, and excellent surface finish.

Belt or geared spindles to provide maximum torque.
Large box ways for rigid and heavy cutting.
Pre-tensioned ballscrews minimize thermal growth and improve accuracy.
Direct-coupled motors increase accuracy and speed.
Spindle chiller maximizes heat dissipation.
Extra-wide door openings facilitate easy loading and unloading.
Hand-scraped contact areas.
Robust, precision-machined castings.
Box-shape bed made of one-piece casting.
Integrated washdown and chip management system.
Absolute encoders ensure fast start-up.
Fanuc© 0i-MF Plus Control.

Technical Specifications

Control
Control Type	Fanuc© 0i-MF Plus
Travel
X-Axis	60 in (1524 mm)
Y-Axis	30 in (762 mm)
Z-Axis	28.3 in (720 mm)
Distance from Spindle Nose to Table	5.91 ~ 34.3 in (150 ~ 870 mm)
Table
Table Size	63 x 30 in (1600 x 760 mm)
Table Max. Load	3300 lbs (1500 kg)
T-Slot Size	5 x .87 in on 5.91 in Centers (5 x 22 mm on 150 mm Centers)
Spindle
Spindle Speed	6000 rpm
Spindle Power	25 HP (18.5 KW)
Spindle Taper	CAT 50
Peak Spindle Torque	437.2 ft lb (592.76 Nm)
Through-Spindle Coolant	30 bar / 435 psi
Feed Rate
Rapid Traverse (X/Y/Z)	708 x 708 x 630 ipm (18 x 18 x 16 m/min)
Cutting Feed Rate	0.04 ~ 196.85 ipm (1 ~ 5, 000 mm/min)
ATC
ATC Type	Swing Arm
Magazine Capacity	24 Tools
Max. Tool Diameter	Next pocket empty 4.33 / 8.66 in (110 / 220 mm)
Max. Tool Length	11.81 in (300 mm)
Max. Tool Weight	33 lbs (15 kg)
Tool Shank	CAT 50
Space & System Requirements
Machine Net Weight	30865 lbs (14000 kg)
Electrical Power Consumption	35 KVA
Pneumatic Pressure	5 CFM @ 85-115 psi (0.14m3 /min) @ 6-8 bar
Operating Dimensions	275.59 x 220.47 x 128.19 in (7000 x 5600 x 3256 mm)

Information may change without notice. Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions.