A division of Hurco Companies, Inc.
A division of Hurco Companies, Inc.
VC1500
3-Axis Vertical Machining Center
VC SERIES CNC Mill
High Efficiency Die/Mold Machining Center with Direct-Drive Spindle Technology
- Rapids of 1417 inches per minute.
- Perfect combination of fast cutting and high stability.
- Pre-tensioned ballscrews minimize thermal growth and improve accuracy.
- Direct-coupled ballscrews increase accuracy.
- Ergonomic table simplifies setup.
- Swiveling control panel optimizes floor space utilization.
- Robust, precision-machined castings.
- Hand-scraped contact areas.
- Integrated washdown and chip management system.
- Spindle chiller maximizes heat dissipation.
- Absolute encoders ensure fast startup.
- Fanuc© 0i-MF Plus Control.
Technical Specifications
| Weight | 1984 lbs |
|---|---|
| Travel |
|
| X-Axis | 1524 mm |
| Y-Axis | 762 mm |
| Z-Axis | 610 mm |
| Distance from Spindle Nose to Table | 120 ~ 730 mm |
| Table |
|
| Table Size | 1680 x 762 mm |
| Table Max. Load | 1360 kg |
| T-Slot Size | 18 x 100 mm x 7 |
| Spindle |
|
| Spindle Speed | 15000 rpm |
| Motor Power | 20.1 HP (15 kW) |
| Spindle Taper | Big Plus® CAT 40 Direct Drive |
| Feed Rate |
|
| Rapid Traverse (X/Y/Z) | 1417 x 1417 x 994 ipm (36 x 36 x 24 m/min) |
| Cutting Feed Rate | 0.04 ~ 472.44 ipm (1 ~ 12,000 mm/min) |
| ATC |
|
| ATC Type | Swing Arm |
| Magazine Capacity | 30 Tools |
| Max. Tool Diameter | 75/125 mm |
| Max. Tool Length | 300 mm |
| Max. Tool Weight | 7 kg |
| Tool Shank | CAT 40 |
| Space & System Requirements |
|
| Machine Net Weight | 11000 kg |
| Electrical Power Consumption | 50 KVA |
| Pneumatic Pressure | 6kgf/cm² |
Information may change without notice. Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions.
Standard Features
- 100 gallon coolant tank
- 3-light indicator lamp
- 4th axis interface cables and connectors
- Centralized automatic lubrication system
- Electrical cabinet heat exchanger
- Ethernet and RS-232C interface
- Full enclosure
- Leveling bolts and pads
- Manual pulse generator (MPG)
- Operation-safety door switches
- Operator manuals
- Programmable chip auger with lift-up exhaust tube and chip cart
- Programmable coolant wash down
- Programmable cutting air blow
- Spindle chiller
- Toolbox
- Wash down gun and air gun
- Work light
Optional Accessories
- 1 Gigabyte Data Server
- 4th axis rotary table
- BT 40 tool holder conversion
- Collant filtration
- Coolant through spindle (CTS)
- Lift up chip conveyor with cart
- Memory card editing
- Oil mist collector
- Oil mist device
- Oil skimmer
- Part probe measurement system
- Tool probe measurement system
